Guide: Idle my Flow

This article explains how to use Flow 2’s new battery management feature: Idle my Flow.  This feature is only available on Flow 2.  

Idling your Flow

Tap the button on the bottom right hand side of your screen to be brought to the SETTINGS screen of your Flow App.  You will be brought to the screen below.  

Tap Idle my Flow.

You will be brought to this screen.  Tap NEXT.

 

Tap 24 Hours, 8 Hours or 24 Hours to select how long you would like to
Idle your Flow.  

You  will be prompted to tap CONFIRM to put your Flow into battery saving mode.

After tapping confirm, you will be brought to this screen.  Tap OK to exit.  

Seeing how much idle time your Flow has left

There are two ways to see how much idle time your Flow has left.  

The first is the SETTINGS screen under DEVICE.  

You can also see how much of the idle period is left on top of your Flow’s main screen. 

Waking your Flow

Want to end the idle period early?  No problem! Follow the steps below. 

From the SETTINGS screen, tap Wake my Flow.  

You will be brought to this screen.  Tap WAKE MY FLOW.  

When you select CONFIRM, your Flow will be back to normal mode. An additional warm-up period might be necessary if your Flow has been in Idle mode for a long period of time.